Competition/ Parts/ Lotus for sale.

[chevman47]

One pair of WILLANS full harnesses, 2", Black, clip-on, 3 point fixing, suitable for baby elan.As new, out of date,OK for British hillclimbs or track days.£60 pair..Elan race exhaust manifold and system, side exit.Solid. £70. Dry sump tank, alloy, 7 1/2" dia by 14 1/2" tall.Very little use £95.One set of Lotus con-rods 125c, not steel, £100.One set of +40 Lotus cast pistons, one is minus it,s rings. very useable, £35.Caterham type battery tray to take "torque " starter type battery, £10. One pair of very useable BBS alloy wheels to fit single seater,10" by 13", To fit on 6 peg fitting, 3 1/2" PCD. £85 pair.. I also have a set of 26R lotus Elan front wishbones in stock to sell, + 26R rear "A" Frames, all rose-jointed, when I can find them. Varley Red 30 type battery box, Fibreglass, no lid, £10.Please ring me on 07791-403497 or message me for more info. Chevman47, Chris..

[Gavinm]

Hi Chris

Interested in the 26r front wishbones when you find them.
May also be intersted in the race exhaust but could do with more info - does it run between the engine and the chassis rails and below the floor level or is it routed differently. (a photo may help)
Many thanks
Gavin

[chevman47]

Hi Gavin, The manifold runs over the outside of the chassis and thro, the passenger compartment, over the floor and out thro, the sill and down the side of the sill.It would mean cutting away bulkhead parts.I do not think many people would like to do that to an Elan these days. OK in the old days with Modsports cars.You struggle to get a decent manifold to fit in the proper location of an Elan.Hope this helps, Regards, Chris..

[vision89]

hello Chris
do you know if the wheels would fit a ralt
many thanks Pete

[chevman47]

Sadly, I have no idea what they will fit.Someone said that they thought they would fit a Pilbeam.All I know is that they have 6 holes for the peg drives on the car,s hubs. These are set at 3-1/2" PCD. They are 5-7/8" from the inside working face to the very inside of the rim.I believe they are BBS.16 bolt split rims.272mm across the pcd of the 16 bolts.Ihope this helps you! Regards, Chris..

[chevman47]

Sorry Pete, Meant to say that of course they are single nut fixing, to the hubs.Regards, Chris..

[chevman47]

The "PILBEAM" wheels are now sold