|
|
|||||||
| Projects Forum for the discussion and showing of Uphill Racers members projects |
 |
|
|
Thread Tools | Display Modes |
|
#11
01-04-10, 14:21
|
||||
|
||||
|
pictures
P3120373.jpgour toyota beams instalation.... this engine is a dual vvti .. Black top..out of a Alteezza rs2000..
|
|
#12
01-04-10, 14:39
|
||||
|
||||
|
engine instalation
P7140402.jpg Exhaust side without pipes..P7140405.jpginlet side with throttle bodies and inlet manifold are made here in Aus to suit the Beams engines.. as is the starter. the balancer is a custom made by Ross in Sydney and is a one off..Im using a Piper cross box filter..
|
|
#13
05-04-10, 01:21
|
||||
|
||||
|
more pictures
P3020205.jpg Two Asian beauties....At Asian F3 2008 had to put this in now back to the car....P1310350.jpg Iwas having problems w the balancer..so i contacted Ross harmonic balancers in Sydney... they make custom one of a kind etc.. also at a reasonable price this was the first one ever they made like this..it took some time but a great piece of work...
|
|
#14
15-04-10, 15:41
|
||||
|
||||
|
picture
P7050397.jpgthis picture represents the dry sump pump and inlet water pipes side of engine... all parts are made and machined by us.. Also at the moment we are building a website.....so more on that later
|
|
#15
27-04-10, 15:53
|
||||
|
||||
|
more pictures
P7050398.jpgthis picture represents the inlet side with the starter motor attached.. thanks to yobdab for his help on this..There are not many guys here with cars like this here and its been great help to have a forum like uphillracers...
|
|
#16
19-06-10, 16:46
|
||||
|
||||
|
The updates
WE here have progressed quite a bit... as i have quite a few molds we have made a new engine cover. this turned out quite well. we have finished the dry sump system for the car some pictures to follow of this .. We are also getting some of the upgraded front wing end plates from Del at DJ.. these have been designed by Simon Mcbeath...some on this forum may have a set already.. so next is the electrics... Gary Rowe a great whizz at wireing cars and also a motec dealer is taking care of this already a great job Dad and i have just finished the mock up of the dash surround ... this looks great . to it will be made from carbon on monday...Painting of car ... choice of color this has been a point of discussion these past weeks... so youll all have to wait ..though a couple of forum members know what colors we are using the color will look striking.....
|
|
#17
19-10-10, 15:44
|
||||
|
||||
|
423.jpg
421.jpg We must thank PPG Industries and our painter Andrew for giving his time to paint the car the color is Vitamin C a 70s rt E38 charger color from Australia this color has not been mixed by PPG for 30years
|
|
#18
19-10-10, 15:58
|
||||
|
||||
|
yes some more
404.jpg
397.jpg these show the beams engine from both intake and headers the engine is now at Moe engines for a full rebuild ... this has been a major task to fit this engine and most of our time has been spent here..
|
|
#19
19-10-10, 16:55
|
|||
|
|||
|
Good work, but I don't like the look of that top engine mount to the cam cover, may as well not bother, or is there something else that I can't see?
Rob
__________________
"Are you sure that’s the colour you want?" :o
|
|
#20
19-10-10, 19:42
|
|||
|
|||
|
Top Mount
You cannot not bother, there is not much else except for a side frame on a Toyota installation. The engine is obviously tall for a 97 installation as the top plate is normally flat. Most 97 cam covers are very low being specially made like the Speiss Opel cover.
I would probably think again about the angled connections to the top of the tub.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
