Quick Lift Jack & Trailer

[redturner37]

pistake.....

[redturner37]

[QUOTE=andylaurence;39883]redturner37: Didn't realise you were trying to sell the jack. If you do get into the trailer business in the next couple of weeks, let me know.[/QUOTE] I sell lots of jacks. We have sufficient steel in stock to build a dozen trailers. If you are serious, let me have the size and we will build you one. If the weights are right, you dont even need brakes.....

[oldman]

I have sitting in my shop a Brian James two wheel Clubman trailer complete with winch / side tool box etc, I purchased it last year from Andrew henson and have only used it once /stored indoors £850 and its yours, £1300 new.
Tel no 07802548291 or 01841541433.

[andylaurence]

I'm still on the look-out for a trailer. Needs to fit the following:

Wheelbase (axle centres): 260cm / 102" / 8'6"
Bed length (realistically): 285cm / 112" / 9'4"
Width: 170cm / 67" / 5'7"
Rear axle line to rear wing: 75cm / 30" / 2'6"

The trailer really needs to have a gross weight of under 1500kg and a winch. The car is only about 450kg, so carrying capacity unlikely to be tested!

[PumaWestie]

See parts for sale.

[andylaurence]

[QUOTE=PumaWestie;40343]See parts for sale.[/QUOTE]
If only it was 2 inches wider. It looks like an absolute bargain and not too far to go either. My requirements seem to make finding a suitable trailer pretty difficult - anything wide tends to be heavy.

[Radical]

you need a traler built up and over the wheels, the comercial ones tend to be moving heavy plant. You probably need custom built to be that narrow :(

[andylaurence]

Whoops! That width is the minimum bed width I need, not my maximum width. Sorry. My problem is that there are very few trailers with a gross weight of under 1500kg and many of them have a bed width of less than 170cm. I'm thinking that I will have to pull in favours to tow my car for the two outings this month then take my B+E test so I can actually tow something of note.

Looking back at my posts, I think it could be read that I've been a bit terse and dismissive of the help offered, so just to clear that up, I really appreciate all the help people have offered here.

[Dermot Healy]

i am confused by all this .....both by your measurements (and the logic behind your requirements)....however....there is nothing new in this as i am very easily confused.

I sell lots of trailers (& lots of quick-lifts) & if you are still in need & choose to ring me on 07703-162409 i may be able to assist!

[Rescue Dude]

[QUOTE=Dermot Healy;40447]i am confused by all this .....both by your measurements (and the logic behind your requirements)....however....there is nothing new in this as i am very easily confused.

I sell lots of trailers (& lots of quick-lifts) & if you are still in need & choose to ring me on 07703-162409 i may be able to assist![/QUOTE]

I did try and point the gentleman in your direction earlier Dermot but he obviously doesn't want quality merchandise at an affordable price. ;)